I'm building a schematic and I wanted to add in a few .define statements onto the schematic page. I went into text mode, clicked in the schematic, and then typed in multiple .define statements into the text dialog box. Why isn't it recognizing the statements?
The problem is occurring because multiple command statements were typed into the dialog box at one time. The text mode should have only one command statement, such as .define, .param, .ic, .model, typed in each time the dialog box is called up. In text mode, click in the schematic, type in one command statement and hit OK. Click in the schematic again, type in the second command statement and hit OK. Repeat as needed.