Analysis - General
How do I change the number of digits that appear on the Y Axis scale?
The format of the X and Y scales can be changed through the Properties dialog box. The procedure is as follows:
1) Click on the Properties button in the analysis limits, or if the simulation has already been done, hit F10 or double click in the plot window to call up the Properties dialog box.
2) Click on the Scales and Formats tab.
3) There is a Scale Format field for both the X and the Y axis. The value in these fields control the number of digits to the right of the decimal point. The scale that will be changed is the one that is used by the highlighted waveform in the Waveforms list. Clicking on the Use Common Formats command button will format all scales to the values on the screen.
4) Hit OK.