I'm running a Dynamic DC analysis on my schematic. When I enable multiple displays such as voltage, current, and power, the schematic can start to get cluttered. Is there a way to suppress some of the display elements?
The voltage displays can not be suppressed. These are assigned to the individual nodes and can not be disabled. However, the current, power, and condition displays are all assigned to individual components and may be enabled/disabled within the Attribute dialog box. Double click on a component while in Select mode and the Attribute dialog box will be invoked. Near the top of the dialog box there is a Display section. In this section, there are Current, Power, and Condition options which determine whether the corresponding schematic display for the component will appear on the schematic when that display type is called for. These options control the display status for both Dynamic DC and Dynamic AC analyses.